Restoring the geometry of the plastic window sill in Minsk

Diagnosis of the disease

Repair of twisted and curved plastic windows

Why did the shutter come off and how do I restore geometry without replacing the entire structure?

Dimitry · Sпраўнае Akenza · rpo.by · Minsk

The curving of the crease is one of the most unpleasant problems of plastic window owners. It is particularly common in structures with one-sided lamination, windows on the south side, and high or wide windows.

Restoring the geometry of one creature — 120 and 150 rubles.It's 2–3 times cheaper than ordering and installing a new shutter.

Why does the crease lose its geometry?

The main reason for this is low-quality reinforcement. The plastic profile is a metal reinforcer. Many manufacturers save on this element: they put a thin metal of irregular shape (called a "foulge") instead of a thick original profile.

It's particularly unfortunate when the problem is detected during the warranty period. It's almost impossible to prove to the installers that the defect is caused by poor quality materials, not by operation.

Signs of a crevice curve:

✔ What is it?The work is shaken on the frame when it is opened/closed.
✔ What is it?Cracks (bloating) even after adjusting the press
✔ What is it?The handle is turning with effort or not to the end
✔ What is it?It's visual to see that the crease is "buzzing" or curved.

How I restore the geometry of the lattice

Repairing curved trunks is a complex and laborious process.

Dismantling the shutter I take the shutter off the furnace and I clean it carefully, remove the sticks, pull out the glass packets.

2 of the

- What? The fan is used to heat the problem areas of the profile so that the plastic becomes elastic and allows the metal amplifier to be leveled or replaced.

3 of the

Equalization and reinforcement If necessary, I install additional rigidity ribs or adjust the form of the reinforcement.

4 of them

Assembly and adjustment I'm going to pick up the shutter in reverse, install the glass package, hang the shutter and make the final adjustment of the furniture.

I guarantee this kind of repair, and the guarantee of repairing a window that was originally assembled incorrectly is given only by a master who is confident of his competence.

The Benefits of Being With Me

✔ What is it? Free travel and diagnosisI'll come to any point in Minsk and Minsk district, check the window and name the exact price.
✔ What is it? Working with any profile— experience allows you to restore the geometry of any manufacturer's windows.
✔ What is it? Guarantee up to 1 year— written guarantee of quality of work.
✔ What is it? The savings— repairs will cost 2–3 times less than a complete replacement of the shutter.

Frequently Asked Questions

Can we just skip the regular adjustment instead of rearming?

If the reason is in the loops or the push button, yes, it will help.the usual regulationBut if the flap itself is visually bent or it's a bracing thing, and the adjustment won't help, you need to restore the geometry.

Will the glass pack break when the shutter is unlocked?

No, dismantling the staves and extracting the glass packaging is a standard procedure that I do carefully, without damage.

Is there any guarantee that the fuse won't come back?

I give a one-year written guarantee for this kind of repair. if it was a weak «folga» instead of normal reinforcement — after the reinforcement the problem does not recur.

Straighten the crooked window sill in Minsk

Don't tolerate the screws and screws, get the window back in perfect shape.

+375 29 135-50-50

The curve crease — solution

If the shutter is down and the window doesn't close properly, I rearm the profile (replace/strengthen the armor) and correct the geometry with subsequent adjustment.

Dmitry, a master of plastic windows repair Sпраўнае Akenza · rpo.by · Minsk · more than 9 800 repaired windows