Condensate on plastic windows in Minsk: causes and ways to eliminate

With the onset of cold, many residents of Minsk and Minsk district are faced with the problem of plastic windows being wrapped. Glass «cry», water spouts appear on the window sill, and mold can form in the corners.

I, Dmitry, a window repair worker with experience since 2003, have helped hundreds of clients deal with the problem of sweating.

Why are plastic windows being stained?

Condensate is water that appears on the cold surface of a glass from warm, humid air. The higher the humidity in the room and the colder the glass, the faster the dew falls.

• High humidity.Cooking, drying clothes, a lot of room plants, aquariums, all of this increases humidity.
• There's not enough ventilation.Plastic windows are sealed, and if there is no normal fresh air flow (ventilation grids are closed, drawers are not working), moisture accumulates.
• Bad heat insulation of the window.If the glass packaging is too cold (one-room instead of two-room, no energy-saving dust), its inner surface cools down heavily.
• Not enough room heating.Poor operation of radiators, their incorrect location or closure of curtains/wide windows prevents warm air from warming the glass.
• Construction or repair errors.The freezing walls, the cold bridges in the back, the finish is wrong.

The role of ventilation and warming in removing condensate

Ventilation is the main enemy of humidity

Even the best glass packaging won't save if the room is constantly humid. Check how the ventilation in your apartment or home works. Bring a piece of paper to the ventilation grille; if it sticks, there's a drag. If not, you need to clean the drains or install a forced drain.

What can you do:

• Breathe in regularly.Use micro-ventilation (if it's on your windows) or open the shutters for 10–15 minutes several times a day.
• Set up the flow valves.Special ventilation valves (on the wall or on the window) provide a constant flow of fresh air without any drains and heat loss.
• Check the kitchen and bathroom drawer.A particularly powerful retractor is needed over the stove; it removes the steam and odor at once, preventing them from spreading through the apartment.
• Use the air dryers.If the humidity is stable above 60%, a household dryer will help to reduce it quickly.

Warming up windows and windows

The second important factor is the temperature of the inner surface of the glass. The higher it is, the less likely it is to condense.

How to improve:

• Replace the glass packaging with a power-saving one.Modern two-chamber glass packets with low emission pollutants (i-glass) and argon filling are much warmer than usual. If the window is old and constantly 'laquo;raquo'; this may be the best solution.
• Check the sealants.Replace them with new quality rubber (I recommend German — REHAU, KBE, Schlegel).
• Warm up the scratches.The cold often penetrates through the wall-frame junctions, and if the debris freezes, it needs to be re-heated using a heat sink (penoplex, mineral cotton) and properly sealed.
• Adjust the squeeze.In winter, tighten the grip (turn the straps into the "winter" position) so that the bracket is closer to the frame.

How to improve microclimate in the room

The best thing about a comprehensive approach is that I recommend this to my clients:

1. Keep the humidity under control.Buy a hygrometer (a humidity meter). The norm is 40%. If higher than that, take measures (ventilation, dryer).
2. Don't dry your underwear in the rooms.It's better to use a dryer or dry things in a bathroom with a drawer on.
3. Don't turn off the radiators.Remove the high colors and wide curtains from the windows that prevent the circulation of warm air. If the window is too wide, install ventilation grids to allow the air from the battery to rise to the glass.
4. Arrange for proper air exchange.Flow valves and a proper drawer are the foundation of a healthy microclimate.
5. Keep your windows cleaned regularly.Clean and lubricate the furniture once a year, check the seals, clean the drainage holes.

Frequently Asked Questions

Why are new plastic windows getting wet and old wooden ones not?

The old wooden windows were non-airtight; they let air through the cracks, providing natural flow and ventilation. The plastic windows are airtight, and if the ventilation in the house is bad, moisture accumulates. It's not a lack of windows, but a feature of modern technology that requires proper organization of air exchange.

Can I remove the condensate myself?

If the cause is high humidity or insufficient ventilation, yes, you can handle it yourself. If the problem is with freezing off the debris, worn-out sealants or cold glass packaging, it's best to ask a specialist to diagnose and repair.

Does the glassworking of special compositions help to prevent glazing?

Car anti-inflammatory agents or folk remedies (soap, glycerin) can give a temporary effect, but they don't really solve the problem.

You're dealing with condensate removal?

Yes, I do a full window diagnostic: I check the ventilation, the condition of the seals, the geometry of the holes, the warming of the shutters.

Why should you come to me?

• 20 years of experience.I've been working with plastic windows since 2003 and I know all about the causes and methods of fighting condensate.
• Free admission and diagnosis.I'll come to you at a convenient time, inspect the windows, measure the humidity (if the device is available), give detailed recommendations and name the exact cost of the work.
• It's an individual approach.I'm not suggesting a patterned solution; I'm looking for the real cause of the problem in your particular case.
• The materials are of high quality.I only use certified sealants, sealants, heaters and parts.
• Guarantee up to one year.I give a written guarantee on all types of work.
• It's a dirty job.I'm cleaning up after the repairs.

Order the window diagnostics at the condensate in Minsk

If your windows are constantly 'laquo' paying, water is accumulating on the window sill, or you notice the first signs of mold — do not delay. Call me right now for a free consultation and check-out. I work in Minsk and Minsk district promptly and with quality guarantee.

Telephone for communication: +375 (29) 135 -50-50