Fixing the installation of the balcony in Minsk: we return geometry and aesthetics

Correction of the installation of · Minsk

The balcony block was standing with a two-centimeter bias: how did I get it back to the correct geometry

I'm looking at a real case: flat-out assembly, disassembly, and precise reassembly.

Dimitry · Sпраўнае Akenza · rpo.by · Minsk

The balcony block (window + door) was installed in a poor way and with a noticeable deviation from the plane. The product itself and the quality of the materials did not cause complaints, but the installation was not easy. The difference in width of the reflections was 2 cm, and this was visible to the naked eye.

I, Dmitry, a master in repair and maintenance of plastic windows in Minsk, I work since 2003, I have passed through more than 9,800 windows.

The main thing is:If the unit is upside down, you can't do it with one adjustment. You have to dismantle it and keep the design and finish, prepare the gap and re-assembly it with the level and the lift.
The overlay of the installation is not only «uncleasant».It gives an uneven load on the furniture, causing the beams to get stuck, bloating and wear and tear.
Correction of the balcony block installation
After the inspection
The exact cost is after the free diagnosis.

What was the problem?

  • I'm not going to. It's a visual defect.The width of the right and left eyelashes varied by 2 cm. This immediately caught my eye and damaged the entire appearance.
  • I'm not going to. A deviation from the plane.By applying the level, I confirmed that the block was set with a two-centimeter bias relative to the plane of the wall.

This type of installation error is not only ugly, but it can also lead to problems with opening the trunks, uneven loading of the furniture, and even bloating.

How I Solved the Problem

1
Dismantling with integrity I've carefully removed the balcony block so as not to damage the structure or the surrounding finish.
2 of the
Preparing the pier Checked the geometry of the gap, removed the foam residue, leveled the surface to provide a reliable foundation for the new installation.
3 of the
Installation with precise trimming The unit was reinstalled using level and drag. It was perfectly positioned without any deviations.
4 of them
The final stage He filled the seams with quality foam, installed a drain and window sill (if necessary).

The result

  • ✔ What is it?The balcony block now stands perfectly straight, strictly in the plane of the wall.
  • ✔ What is it?The width of the reflections is the same, the appearance is aesthetic and neat.
  • ✔ What is it?The work is done during the day, carefully and with a guarantee.

How much is it worth?

The job The price
Correction of the balcony block installation (demonstration + re-assembly) After the inspection
Sewing seals, warming up under the window. 150 and 200 rubles.
The window (work) from 120 rubles per m
Lower casting (painted, with material) from 60 rubles/m
Window adjustment after installation (first crevice) 50 roubles.
What's important is:The final cost depends on the size of the unit, the amount of work and the need for new materials (pen, drain, window sill).

From the practice of a master

From the practice of a master

The apartment in Minsk. The balcony block (window + door) from the developer is installed with a deviation from the plane: the difference in the width of the right and left reversals — 2 cm. The product itself is normal, the complaints were to the installation.

The unit was removed from the wall plane by 2 cm. It dismantled the structure and finish, removed all the attachments, cleaned the old seams, checked the geometry of the piercing, leveled the surface, re-installed the unit by level and level, added the attachments from the shifting.

The block is straight, the reversals are the same, the opening is free.

Why it's important to correct the installation errors in time

  • ✔ What is it? It's aesthetic.The overlapping windows and doors spoil the interior and facade.
  • ✔ What is it? The functionality.The wrong geometry leads to the cracking of the stones, wear of the furniture, bloating.
  • ✔ What is it? It's a long life.The uniform load on the structure prolongs its service life.

If you're facing a poorly-designed setup, don't put up with it and don't waste your time on the process.

Why You Should Talk to Me

  • ✔ What is it?I've been working since 2003, over 9,800 windows have been repaired.
  • ✔ What is it?I work with windows after any installers and installers; fix installation errors.
  • ✔ What is it?The trip and the diagnosis are always free — whether you agree to the job or not.
  • ✔ What is it?Payment only after the results, no down payment.
  • ✔ What is it?Guarantee for a job up to one year, in writing.
  • ✔ What is it?I work alone, without any crew or intermediaries.
  • ✔ What is it?I work for the NPD, I give out a check.

Frequently Asked Questions

Can we fix the intersection without completely dismantling the window?
If there are slight deviations, adjustment sometimes helps, but if the gap is 2 cm, as in this case, you can't do without removing the structure.
Will the decoration be damaged when dismantled?
You can't guarantee 100%, it's always a risk, but when you do it carefully, the finish is as good as it is in this order, the parts are protected, the fasteners are removed gradually, the old seams are cleaned manually.
How long does this work?
Usually one day, depending on the difficulty of access, block size and surrounding finishing.
How much is it to fix the fitting?
The price depends on the amount of work and the need for new materials (pen, drainage, window sill).
Can I make a complaint to the firm?
If the warranty is still in effect, try it out. But in practice, a 2cm gap is often credited to the "assembly permits", and the proceedings take months.
Is there a guarantee?
Yes, up to a year's work, in writing.
Is the block upside down?

I'll come down and check the level and tell you honestly, stop the adjustment or I need to dismantle and re-assemble.

+375 29 135-50-50

Viber · Excursion through Minsk · Payment after the result · Guarantee 1 year

See also

Removing the bugs after installation

Repair after the builder — free to leave

Regulation of windows and balcony doors

50 rubles. — first crease, +10 rubles. each subsequent crease

Repair of curved trunks

120–150 rubles — restoration of geometry

Geometrically adjusted creatures

The shape of the crease is restored from 120 rubles.

Replacement of window and door fittings

from 270 rubles. — complete set with work

Replacing the Schlegel sealant

10–14 rubles / m — ordinary and co-extruded

Call a window repair master in Minsk

I work weekends, I go out on the day of the trial, and I get a free diagnosis.

Leave the application

I 'll give you a short one.

The 2 cm balcony block is not subject to adjustment: it needs to be dismantled with the construction and finishing, the preparation of the piercing and the re-assembly of the level and the lift.

D.
Dmitry, a master of plastic windows repair Sпраўнае Akenza · rpo.by · Minsk · more than 9 800 repaired windows

Similar projects

Показать ещё
Contact me

Contact me

After submitting the form you will receive a call at the earliest opportunity. Waiting time is from a few minutes to a few hours.

Repair request

I will call back within 10 minutes.

By clicking the button you agree to the processing of personal data.

Оставить заявку
Contact me
🤔 Боятся ли клиенты
вызывать мастера?