Replacement of window dressing in Minsk: neatly, without damaging the finish (real example)
Replacing the window without damaging repairs: how to preserve the drapes and finish
The real case in Minsk: a yellow window sill from a non-working manufacturer.
Dimitry · Sпраўнае Akenza · rpo.by · Minsk
The owner of the apartment asked me to replace the window sill. The old one was from a very good and unfashionable manufacturer, but time and sun did their job: the plastic turned yellow, scratches accumulated a lot. The appearance was no longer the same.
I, Dmitry, a master of repair and maintenance of plastic windows in Minsk. I work since 2003, I have passed through more than 9,800 windows.
The job is to replace the window sill without damaging the repair.
It's always hard and laborious work. You can never give a 100% guarantee that the finish will remain intact. There are too many factors: how dirty the old window sill is, how tight it is attached to the rear, what repairs are around it.
How the replacement went
The process took several hours and required jewelry accuracy:
The result
The finish was virtually untouched, and the result exceeded expectations, and the customers were satisfied. The next job they planned to do (cutting the foam from below, smearing the solution, gluing the sheets back, applying acrylic sealants to the backs) was to be done by their own master, but if necessary, I can do these steps as well.
How much does it cost to replace the window sill?
| The job | The price |
|---|---|
| Dismantling and installation of window (work) | from 120 rubles per m |
| The material of the & apos; laquo; satin & apos; window | from 100 rubles/m² |
| Replacing the sealant (common / Schlegel) | 10 / 14 rubles / m |
| Sewing, warm-up under the window | 150 and 200 rubles. |
From the practice of a master
Why should a window sill be trusted by a master?
- ✔ What is it? The risk of damage to the walls and the rear.A sloppy dismantling is a broken wall that has cracked the backbone, and repairing will cost more than replacing it.
- ✔ What is it? The right setup.The window sill should be at a steady level, with a slight slope from the window so that the water does not flow.
- ✔ What is it? It's aesthetic.The knots are neat, without cracks or creases.
- ✔ What is it?I've been working since 2003, over 9,800 windows behind my back.
- ✔ What is it?The trip and the diagnosis are always free — whether you agree to the job or not.
- ✔ What is it?Payment only after the results, no down payment.
- ✔ What is it?Guarantee for a job up to one year, in writing.
- ✔ What is it?I work alone, without any crew or intermediaries.
- ✔ What is it?I work for the NPD, I give out a check.
Frequently Asked Questions
I'll come and check for free, offer the material and replace it carefully, taking care of your repairs.
+375 29 135-50-50Viber · Excursion through Minsk · Payment after the result · Guarantee 1 year
See also
from 200 rubles/m² — same type, with work
50 rubles. — first crease, +10 rubles. each subsequent crease
10–14 rubles / m — ordinary and co-extruded
Repair after the builder — free to leave
I work weekends, I go on the day of the trial, and I get a free diagnosis.
Leave the applicationI 'll give you a short one.
The main risk is to damage the rectum and walls when dismantling: no one guarantees this, but with the right equipment the finish remains intact. Work starts at 120 rubles/m, PVC material starts at 100 rubles/m.
-post-preview.webp "The window always opened at the same time in both positions.")
