Balcony door doesn 't squeeze from above: 4 reasons and what to do about it
Diagnosis of · Minsk · 2026
Balcony door doesn 't squeeze from above: 4 reasons and what to do about it
A master's breakdown: how to tell a simple adjustment from a serious breakdown of the furniture
Dimitry · Sпраўнае Akenza · rpo.by · Minsk
You close the balcony door, and there's a crack on the top, or the pen is like a normal rotation, but you feel a flickering spark on the top, and it's obviously cold out there.
And it almost always has one of the four specific reasons, not that the door is getting old, but a very specific detail that's stopped working properly.
The good news is:In three out of four cases, it's not about changing the door, but about a specific piece of furniture that's being made for one visit.
How much to fix the problem
| What to Do | The price |
|---|---|
| The lower loop is adjusted | 50 roubles. |
| Replacing the angle transmission | 120 roubles. |
| Replacing scissors (with a counter plank) | 150 roubles. |
And the exact reason and the cost I'll give you after I look at it, and the diagnosis is free, and so you can get a rough idea of what's going on with your door before you call, let's look at each of the reasons separately.
Four reasons why the door doesn't slam from above
1
The door slid down the bottom loop. The most common reason is that the balcony door is heavier than a regular shutter because of the large glass package, and over time the loops get a little bit more loaded, the canvas is slightly sloping, the top is shifting, and the shutter just doesn't reach the counter counterboard in the scissors.
How it is manifested:The door closes, but the top of the door closes, and when you press the top of the door, it feels like it's not fixed.
The solution:The bottom loop is adjustable with a six-sided key. 50 rubles.
2 of the
The answering board in the scissors is broken. The top of the door is a "knife" mechanism that fixes the door when it's closed. There's a counterboard inside that is attached to the door.
How it is manifested:The door is straight, it doesn't hang, but it doesn't squeeze from above.
The solution:replacement of the answering board in scissors — is included in the cost of the scissors replacement, 150 rubles.
3 of the
Moving of the center of the chaff due to past repair or assembly Sometimes the reason is not wear, but an error made during the installation or previous repair. If the geometry is broken, all the pins can get stuck except the top one; it just doesn't reach the bar.
How it is manifested:The door closes with difficulty, the top corner is not fixed until the end, sometimes an unpleasant sound is heard.
The solution:The most difficult thing to diagnose is the price is determined after the examination.
4 of them
The corner transmission is cut off The force from the handle is transmitted to all the compression elements through the system of traction and angular switches. If the angular transmission in the upper part is broken, the force simply does not reach there; the scissors and the medium thrust are 'laquo' off.
How it is manifested:The handle rotates normally, but the top of the door is not fixed.
The solution:Replacement of the corner transmission — 120 rubles.
Don't try to fix the door in the back.If you're not sure what the cause is, if the board is broken or the transmission is broken, the wrong adjustment won't solve the problem, and sometimes it will cause a more serious breakdown, and the shutter will fall off.
How to tell which of the reasons you have
The door's open, you can see a crack all over the top?
Most likely the number one cause is the lower loop.
The door is straight, but it doesn't hold up, you hear a metal sound?
It looks like cause number two is a broken answering board in the scissors.
The handle spins normally, but the top doesn't fix, and the bottom and middle work?
Probably the reason for the 4th is the corner transmission.
Are any of these things wrong, or are there a few problems at once?
And there's probably a third reason, a shift in geometry, and we need to get diagnosed on the spot.
Frequently Asked Questions
Can you tell the cause by a photo or video?
Often, send a short video of the door closing and where the loft feels, to Viber, which will help you get a price orientation before you leave.
How long does it take to repair?
Adjust the loop — 15–20 minutes. Replace the angle transmission or scissors — about an hour, including breaking and assembling the mechanism.
If I break the door even harder, trying to fix it myself, will it be more expensive?
Yes, unfortunately, this is the case. Trying to 'push' a door when the plank is broken sometimes damages the adjacent furniture elements, and you have to change several parts instead of one.
Is the diagnosis and the excursion really free?
Yes, in Minsk and Minsk district, you pay only for the actual work done, and only after you check the result yourself.
The balcony door doesn't squeeze from above?
Call or send a video to Viber — I'll give you four reasons and how much it will cost to repair.
+375 29 135-50-50Viber · Free trip to Minsk · Payment after the result of · Working since 2003
D.
Dmitry, a master of plastic windows and balcony doors The real estate of Akenza · rpo.by · Minsk · since 2003 · more than 9 800 windows
